Sell Cement equipment such as rotary kiln, cement mill
Cell: +8613862717731
What's App.: +86 138 6271 7731 http://www.chinapengfei.com
Mr. Sunny
Rotary kiln is the
main equipment for sintering cement clinker. The rotary kilns produced by Jiangsu
Pengfei Group Co., Ltd. can be divided into dry process and wet process. They
can also be used for cement industry, chemical industry, metallurgy industry
and etc. Through technical renovations, the rotary kiln sintering system
equipment made by our company has adopted high measuring precession plunger
pump, variable speed adjusted valve, contact graphite block air seal and other
national advanced technologies. In order to rise up automation degree,
industrial TV has been used at the kiln head for monitoring of kiln, analog
fluorescent screen has been used for display of process flow; infrared scanning
system has been adopted for sintering zone to directly reflect the burning
conditions on the computer. With the use of these new technologies, it is directly
in vision, convenient in operation and reliable in use. Therefore, the condition
can be raised. Compared to been raised 3-5% up, production has been increased
5-10% and heat consumption has been reduced 15% down.
Ⅰ.
Technical parameter & technical performance
1. Specification: Φ3.5×10m
2. Model: MB3510
3. Production capacity: 85-90t/h ( Feed
size:≤5mm, Feed moisture:≤0.5%,
Fineness of finish product 10% residue form
4900 screen )
4. Rotary speed of mill: 17.3 r/min
5. Charging capacity of grinding medium:
110t
6. Main motor: Model:
YR1400-8/1430;Power: 1400KW
Voltage: 6kv or 10 kv
Rotary speed: 740 r/min
7. Main reducer: Model: JD×900
Transmitted power: 1400kw
Speed ratio: I=7.111
8. Auxiliary reducer Model:
ZSY280-Ⅰ/Ⅱ
Input power: 22kw
Speed ratio: I=100
9. Auxiliary motor Model:
YEJ200L2-6
Power: 22kw
Rotary speed: 970 r/min
10. Cooling water consumption for
main bearing: 5×2m3/h ( water temperature:≤25 °C )
11. GYXZ-40A thin oil station
(1) Low-pressure
system:
Flow: 40 L/min
Oil
supply pressure: 0.4Mpa
Oil supply temperature: 40±3°C
Motor:
Y112m-6 2.2kw
(2) High-pressure system
Pump model: 2.5MCY14-1B
Flow: 2.5L/min
Oil supply pressure: 32Mpa
Motor: Y112M-6 2.2kw
(3) Cooling water consumption:
3.5m3/h
(4) Heater power: 3kw×3
(5) Working medium: N220-N320
12. Weight of equipment: 238.7t (
excluding grinding medium )
Main parts & components, and their
materials
1. Main motor: YR1400-8/1430
1400kw 6kv or 10kv
2. Main reducer: JD×900
I=7.111
3. Auxiliary motor:
YEJ200L2 -6 22kw 970r/min
4. Shell material: Q235-B
5. Hollow shaft: ZG230-450 ( ZG 25
)
6. Lining board and partition
plate: Medium chrome alloy